Changing The Normal/Bypass Code And Door Chime Settings - Rosslare CSN SELECT AYC-6355 Series Installation And User Manual

Controller Functionality
7.9.7 Changing the Normal/Bypass Code and Door
Chime Settings
To change the Normal/By pass code and door chime settings:
1. Enter Programming mode.
2. Press 5 to enter Menu 5.
The left LED flashes orange.
3. Enter the new code you wish to set as
Normal/Secure code.
There are four different ways to program the Normal/Bypass code
and door chime.
Enter the code 0000 to disable both

Bypass code and the door chime.
Enter the code 0001 to disable the

Bypass code and enable the door chime.
 Enter any code ending with 0 to enable
the Bypass code and disable the door
chime.
Enter a code not ending with 0 to enable

the Bypass code and enable the door
chime.
You hear three beeps.
The system returns to Normal mode.
48 AYC-x6355 (Rev. B) Installation and User Manual
Green
Orange Green
Green