Table of Contents
Advertisement
3.3 Web Configuration—setup page
3.3.1 Login
The user login interface
3.3.2 User Account
The user account setting limits which user can configure the module settings. The super
user (Account, name="root", password="icpdas") is an only the user that can edit this
page.
3.3.3 Standard Config
When the user changes the setting in this page, the user must restart the M2M-710D for an
active setting. The system has two kind of mode.
Server mode:
System
Host Name
client name
Communication Port
M2M-710D User Manual (Version 1.00, Mar/2009)
Figure 20 User and password
Figure 21 User Account page
There are 2 operation modes in M2M-710D. They are
"Server" and "Client". The user can set the M2M-710D to
be a server or client in this page. When the M2M-710D
plays the role of client, it will try to connect with the
server. When the M2M-710D plays the role of server, it
will wait the client to link.
For the module name
Server's permission name list.
The user can set the port number of the server that the
client wants to link in this setting. The factory setting is
"443".
PAGE：22
Advertisement
Table of Contents
