D Transmitting An Emergency Call; D Transmitting Position Data; D Direct Id Entry - Icom iF4261DT Operating Manual

Previous view
7
NXDN™ OPERATION
Transmitting a call (Continued)

D Transmitting an Emergency call

An NXDN Emergency call can be transmitted in
the same way as the Conventional operation. See
"Emergency call" for details. (p. 4-2)

D Transmitting Position data

When the GPS function is ON, and the internal GPS
receiver receives Position data, the longitude and
latitude data can be automatically transmitted:
• When a GPS request status message is received
• After sending a voice message
L Set the 'Send with Login' and 'Send with Logoff' items to
'Enable.'
• After sending a status message
LSet the 'Send with Status Call' item to 'Enable.'
• After sending a message
LSet the 'Send with SDM Call' item to 'Enable.'
• After sending a Call Alert
LSet the 'Send with Call Alert' item to 'Enable.'
• After sending an Emergency call
LSet the 'Send with Emergency' item to 'Enable.'
LSet the 'Send at ManDown' item to 'Enable.'
• At the preset interval
LSet the 'Auto' item to 'Enable.'
LSet the 'Interval Timer [mm:ss]' item.

D Direct ID entry

From the Menu, you can directly enter the target ID.
L The optional DTMF microphone is required for the
Mobile type transceiver.
1. In the Contact menu screen, push
[P3](≈) or [ΩP3] or [P4≈]
DIAL," then push
Portable
CONTACT
DIRECT DIAL
BACK ENT
Mobile
C O N T A C T
D I R E C T
• Enters the ID Entry mode.
2. Push the appropriate digit key, [0] to [9], to enter
an ID.
LTo delete, push
LIf you enter an invalid ID, "INVALID" is displayed.
Portable
DIRECT DIAL
123
BACK ENT
Mobile
D I R E C T
1 2 3
3. Push [P1](ENT)
NOTE: See the appropriate page for details on how
to operate after entering the ID. (p. 7-4 ~ 7-31)
7-32
[P2](Ω) or
to select "DIRECT
[P1](ENT) or [P2].
D I A L
[P0](BACK) or [P1].
D I A L
or [P2] to set the entered ID.