Icom iF4261DT Operating Manual page 70

Previous view
7
NXDN™ OPERATION
Transmitting a call
D Transmitting a Message (Continued)
Using [Individual] or [Talkgroup]:
1. Push [Individual] or [Talkgroup] to enter the
Application Selection mode.
• "INDIVIDUAL" or "TALKGROUP" is briefly displayed,
then "VOICE" is displayed.
2. Push [CH Up] or [CH Down] to select "MSG," then
push [Individual] or [Talkgroup].
Portable
MSG
MENU TGID ZONE SET TGID
Mobile
M S G
• Enters the Message Selection mode.
3. Push [CH Up] or [CH Down] to select the
message, then push [Individual] or [Talkgroup].
Portable
MSG
Hello!
MENU TGID ZONE SET TGID
Mobile
M S G
H e l l o !
• Enters the Destination ID Selection mode.
4. Push [CH Up] or [CH Down] to select the
destination ID.
Portable
MSG
TG1
MENU TGID ZONE SET TGID
Mobile
M S G
T G 1
5. Push [PTT] to transmit the message to the
selected station or Talkgroup.
• "MSG OK" is displayed after receiving an
acknowledgement from the target station.
• "MSG FAIL" is displayed if the target station does not
send back an acknowledgement.
Using [Message]:
1. Push [Message] to enter the Message Selection
mode.
2. Push [CH Up] or [CH Down] to select a message.
3. Hold down [Message] for 1 second to transmit the
message to the last called station or Talkgroup.
• "MSG OK" is displayed after receiving an
acknowledgement from the target station.
• "MSG FAIL" is displayed if the target station does not
send back an acknowledgement.
7-15