Emergency Call; D Lone Worker Emergency Call; D Man Down Emergency Call - Icom IDAS F3201DEX 14 Operating Instructions Manual

3
BASIC OPERATION

Emergency Call

When [Emergency] is held down for the specified time
period*, the emergency signal is transmitted once, or
repeatedly, on the specified emergency channel.
* Depending on the presetting.
A repeat emergency signal is automatically transmitted
until you turn OFF the power.
Depending on the preprogrammed settings, receiving a
matching 5-tone code cancels the transmission.
When no emergency channel is specified, the signal is
transmitted on the previously selected channel.
If you want to cancel the emergency call, hold down
[Emergency] again before transmitting the call.
If your transceiver is programmed for Silent operation,
you can transmit an Emergency call without the beep
sounding and the status indicator lighting.
IMPORTANT: We recommend you set an emergen-
cy channel individually to provide for reliable emer-
gency call operation.
NOTES
Depending on the presetting, the following functions
are automatically activated.
• Auto TX function
After the emergency call transmission, audio from the
microphone is automatically transmitted for a speci-
fied time period.*
• Auto RX function
After the emergency call transmission, the transceiver
stands by in the Audible mode for the specified time
period.*
* Depending on the presetting.
D Lone Worker Emergency Call
When the Lone Worker function is turned ON, and no
operation is performed for the specified time period*,
the transceiver enters the emergency mode, and then
the countdown for the emergency call transmission
starts.
After the specified time period* has passed, an emer-
gency call is automatically transmitted once, or repeat-
edly*.
If someone operates the transceiver before the call is
transmitted, the transceiver exits the emergency mode,
and the emergency call is cancelled.
* Depending on the presetting.
Hold down [Lone Worker] for 1 second to turn ON
q
the Lone Worker function.
w Push [Lone Worker] to turn OFF the Lone Worker
function.
D Man Down Emergency Call
When the transceiver has been left in a horizontal posi-
tion for the preprogrammed time period, the transceiver
enters the emergency mode, and then the countdown
for the emergency call transmission starts.
After the preprogrammed time period, an emergency
call is automatically transmitted once, or repeatedly,
depending on the pre-programmed settings.
If the transceiver is placed in a vertical position before
the first transmission, the transceiver exits the emer-
gency mode and the emergency call is cancelled.
3-13