Icom iF4261DT Operating Manual page 68

Previous view
7
NXDN™ OPERATION
Transmitting a call
D Transmitting a Message (Continued)
<Menu operation>
TIP: The Portable type transceiver's operations are
described in red. And the Mobile type transceiver's
operations are described in blue.
LThe common operations are in black.
Using the Message menu:
(MENU > MESSAGE > PRE DEFINED)
1. Push [Menu] to display the Menu screen.
• "CONTACT" is selected.
2. Push [P2](Ω) or [P3](≈)
select "MESSAGE," then push
Portable
MESSAGE
BACK ENT
Mobile
M E N U
M E S S A G E
3. Push [P2](Ω) or [P3](≈)
select "PRE DEFINED," then push
[P2].
Portable
MESSAGE
PRE DEFINED
BACK ENT
Mobile
M E S S A G E
P R E D E F I N E D
• Enters the Message Selection mode.
or [ΩP3] or [P4≈] to
[P1](ENT) or [P2].
or [ΩP3] or [P4≈] to
[P1](ENT) or
4. Push [P2](Ω) or [P3](≈)
select a message.
Portable
MESSAGE
Hello!
BACK TX
Mobile
M E S S A G E
H e l l o !
5. Hold down [P1](TX)
message to the last called station or Talkgroup.
• "MSG OK" is displayed after receiving an
acknowledgement from the target station.
• "MSG FAIL" is displayed if the target station does not
send back an acknowledgement.
7-13
or [ΩP3] or [P4≈] to
1
or [P2] to transmit the