D Function Menu - Icom iF4261DT Operating Manual

Previous view
5
MENU SCREEN
Menu items (Continued)

D Function menu

The following settings can be made in the Function
menu screen.
See the following description for item's details.
Signaling Monitor
Lone Worker
Battery Voltage Display
Zeroize
Mobile Function* RX Speaker
Hook Scan
Horn
*Displayed only for the Mobile type transceiver.
• Function menu description
Step 1: Selecting the Function menu
1. Push [Menu] to display the Menu screen.
2. Push [P2](Ω) or [P3](≈)
"FUNCTION," and then push
• Displays the Function menu screen.
Portable
FUNCTION
BACK ENT
Mobile
M E N U
F U N C T I O N
Step 2: Selecting the item
3. Push [P2](Ω) or [P3](≈)
the desired item, and then push
• SIGNAL MONI: Setting the Signaling Monitor
• LONE WORKER: Setting the Lone Worker
• BATTERY DISP: Setting the Battery Voltage
display
• ZEROIZE: Deletes the transceiver's
encryption key.
• MOBILE FUNC
RX SPEAKER: Setting the RX Speaker
function
HOOK SCAN: Setting the Hook Scan function
HORN: Setting the Horn function
p. 5-9
p. 5-9
p. 5-9
p. 5-9
p. 5-10
p. 5-10
p. 5-10
or [ΩP3] or [P4≈] to select
[P1](ENT) or [P2].
or [ΩP3] or [P4≈] to select
[P1](ENT) or [P2].
Step 3: Setting
4. Follow the description on the appropriate page,
described in step e above.
<Items>
• Signaling Monitor "SIGNAL MONI"
1. Push [P2](Ω) or [P3](≈)
select ON or OFF, and then push
to save.
• OFF: The mute is not released (Inaudible status) while
transmitting a DTMF code signal.
• ON: The mute is released (Audible status) while
transmitting a DTMF code signal.
L Push [P0](CANC)
previous screen.
2. Push [P0](BACK)
screen.
• Lone Worker "LONE WORKER"
The Lone Worker function automatically makes the
transceiver enter the Emergency Countdown mode
after a specified time period of inactivity.
1. Push [P2](Ω) or [P3](≈)
select ON or OFF, and then push
to save.
L Push [P0](CANC)
previous screen.
2. Push [P0](BACK)
screen.
• Battery Voltage Display "BATTERY DISP"
Select whether or not to display the battery voltage,
when the transceiver is turned ON.
1. Push [P2](Ω) or [P3](≈)
select ON or OFF, and then push
to save.
• OFF: Does not display the battery voltage.
• ON: Displays the battery voltage for 2 seconds.
L Push [P0](CANC)
previous screen.
2. Push [P0](BACK)
screen.
• Zeroize "ZEROIZE"
Select whether or not to delete the transceiver's
encryption key.
1. When "REALLY?" is displayed, push
[P2] to delete the transceiver's encryption key.
L Push [P0](CANC)
previous screen.
2. Push [P0](BACK)
screen.
5-9
or [ΩP3] or [P4≈] to
[P1](OK)
or [P1] to cancel, and return to the
or [P1] to return to the previous
or [ΩP3] or [P4≈] to
[P1](OK)
or [P1] to cancel, and return to the
or [P1] to return to the previous
or [ΩP3] or [P4≈] to
[P1](OK)
or [P1] to cancel, and return to the
or [P1] to return to the previous
[P1](OK)
or [P1] to cancel, and return to the
or [P1] to return to the previous
or [P2]
or [P2]
or [P2]
or