Table of Contents
Advertisement
Previous view
7
NXDN™ OPERATION
Receiving a call (Continued)
D Receiving a Status Polling call
When a Status Polling call is received, the transceiver
automatically transmits the current status.
The RAN code matching may not be necessary,
depending on the presetting.
D Receiving a Radio Check call
When a Radio check call is received, the transceiver
automatically transmits an acknowledgement call.
The RAN code matching may not be necessary,
depending on the presetting.
D Receiving a Remote Monitor call
When a Remote monitor call is received, the
microphone audio is automatically transmitted for a
set time period.
The RAN code matching may not be necessary,
depending on the presetting.
D Receiving a Stun, Kill or Revive
If a Stun or Kill command is received, the transceiver
will display "SORRY" and you cannot receive* or
transmit.
* Reception may be enabled, depending on the presetting.
Portable
SORRY
Mobile
S O R R Y
When a Stun command is received, you cannot
operate the transceiver until a Revive command is
received or the password is entered.
When a Kill command is received, you cannot operate
the transceiver until you reset it with the cloning
software.
NOTE: Depending on the presetting, the transceiver
can ignore the Stun, Revive and Kill commands that
are from a non-specified station.
D Receiving an Emergency call
1. When an Emergency call is received:
• Beeps sound.
• "RX Emergency" and the calling station name or ID
blink.
• "
" (Portable) or "
Portable
RX Emergency
Station1
MENU DIGI ZONE SET
Mobile
R X
E m e r g e n c y
S t a t i o n 1
2. When the Send Ack function is turned ON,
the transceiver automatically transmits an
acknowledgement to the calling station, if the
received call type is a Group or All call.
L If the received call type is Individual, and it requests
an acknowledgment be sent back, the transceiver
automatically sends the acknowledgement.
3. Hold down [PTT], then speak into the microphone.
4. Turn OFF the transceiver, change the channel, or
push [PTT] or a key to stop the beep and display
indication.
7-34
" (Mobile) is displayed.
Advertisement
Table of Contents
