Table of Contents
Advertisement
Previous view
2
PANEL DESCRIPTION
Assignable Software key functions (Continued)
Compander
In the Analog mode
Push to turn the Compander function ON or OFF.
L The Compander function reduces noise components on
the transmit audio to provide clear communication.
Hook Scan (For the Mobile type transceivers)
Push to temporarily turn the Hook Scan function ON
or OFF.
User Set Mode
z Hold down for 1 second to enter the User Set
mode. In the User Set mode, push this key to select
an item, and then push [CH Up] or [CH Down] to
change the value or setting.
z Hold down for 1 second again to exit the User Set
mode.
OPT1 Out, OPT2 Out, OPT3 Out
Push to output the control signal to the selected option
connector.
OPT1 Momentary, OPT2 Momentary,
OPT3 Momentary
While holding down this key, the control signal is
output to the selected option connector.
Digital Button
In the Digital mode
z Push to enter the Application Selection mode.
z Push to enter the ID Selection mode from the
Application Selection mode.
z Hold down for 1 second to toggle the call type
between Individual and Talkgroup.
L After selecting the call type, the transceiver
automatically enters the Application Selection mode.
TIP: When the "Digital/Individual/Talkgroup Key"
item is set to "ID Select," this key function differs, as
shown below.
z Push to enter the ID Selection mode.
z Push to enter the Application Selection mode from
the ID Selection mode.
Individual
In the Digital mode
z Push to set the call type to "Individual," then
automatically enter the Application Selection mode.
z Push to enter the ID Selection mode from the
Application Selection mode.
z Hold down for 1 second to return to the Standby
mode.
TIP: When the "Digital/Individual/Talkgroup Key"
item is set to "ID Select," this key function differs, as
shown below.
z Push to set the call type to "Individual," then
automatically enter the ID Selection mode.
z Push to enter the Application Selection mode from
the ID Selection mode.
Talkgroup
In the Digital mode
z Push to set the call type to "Talkgroup," then
automatically enter the Application Selection mode.
z Push to enter the ID Selection mode from the
Application Selection mode.
z Hold down for 1 second to return to the Standby
mode.
TIP: When the "Digital/Individual/Talkgroup Key"
item is set to "ID Select," this key function differs, as
shown below.
z Push to set the call type to "Talkgroup," then
automatically enter the ID Selection mode.
z Push to enter the Application Selection mode from
the ID Selection mode.
Reset
In the Digital mode
z Push to reset the destination ID and call type to the
default, if they have manually been changed.
z Push to cancel the Talk Back function, if it is
activated.
z While in the Audible mode, push to return to the
Inaudible mode.
z While in the Selection mode (Example: Application,
Message and Status Message), push to return to
the Standby mode.
L In that case, the transceiver resets the destination ID,
call type, and Talk Back function to the default.
Sp. Func 1, Sp. Func 2
Reserved for future function.
2-11
Advertisement
Table of Contents
