Icom iF4261DT Operating Manual page 47

Previous view
5
MENU SCREEN
Menu items
D Utility menu (Continued)
• Squelch Level "SQL LEVEL"
Set the squelch level to between 0 and 9.
1. Push [P2](Ω) or [P3](≈)
more times to set the squelch level to between 0
and 9, and then push
• Push [P0](CANC) or [P1]
previous screen.
2. Push [P0](BACK) or
screen.
• AF Minimum Level "AF MIN LEVEL"
Set the minimum audio output level to between 0 and
255.
This set level is used when [VOL] is set to the
minimum audio position.
1. Push [P2](Ω) or [P3](≈)
more times to set the minimum audio output level
to between 0 and 255, and then push
[P2] to save.
• Push [P0](CANC) or [P1]
previous screen.
2. Push [P0](BACK) or
screen.
• Mic Gain "MIC GAIN"
Set the microphone sensitivity to between 1(Min) and
5 (Max).
Higher values make the microphone more sensitive to
the user voice.
1. Push [P2](Ω) or [P3](≈)
more times to set the microphone sensitivity level
to between 1 and 5, and then push
[P2] to save.
• Push [P0](CANC) or [P1]
previous screen.
2. Push [P0](BACK) or
screen.
• VOX Gain "VOX GAIN"
(For the Portable type transceiver)
Set the VOX gain to OFF, or to between 1 and 6.
The VOX function automatically switches between
receive and transmit without needing to push [PTT].
Higher values make the VOX function more sensitive
to the user voice.
1. Push [P2](Ω) or [P3](≈)
the VOX gain to OFF, or to between 1 and 6, and
then push [P1](OK) to save.
L Push [P0](CANC) to cancel, and return to the
previous screen.
2. Push [P0](BACK) to return to the previous screen.
or [ΩP3] or [P4≈] one or
[P1](OK) or [P2] to save.
to cancel, and return to the
[P1] to return to the previous
or [ΩP3] or [P4≈] one or
[P1](OK)
to cancel, and return to the
[P1] to return to the previous
or [ΩP3] or [P4≈] one or
[P1](OK) or
to cancel, and return to the
[P1] to return to the previous
one or more times to set
• VOX Delay "VOX DELAY"
(For the Portable type transceiver)
Set the VOX Delay to between 0.5 and 3.0 seconds.
The VOX Delay is the amount of time the transmitter
stays ON after the user stops speaking before the
VOX switches to receive.
1. Push [P2](Ω) or [P3](≈)
the VOX Delay to between 0.5 and 3.0 seconds,
and then push
L Push [P0](CANC)
previous screen.
2. Push [P0](BACK)
Information
• Firmware Information "FIRM INFO"
Displays the transceiver's firmware information.
When an optional unit is installed, you can also check
or the unit information.
Depending on the installed unit, only the name may
be displayed.
1. Push [P2](Ω) or [P3](≈)
or more times to select an item to display the
firmware information.
2. Push [P0](BACK)
screen.
• Clone Comment "CLN COMMENT"
Displays the transceiver's clone comment.
The clone comment 1 is displayed on the upper line,
and the clone comment 2 is on the lower line.
[P0](BACK)
LPush
• ESN "ESN"
Displays the transceiver's ESN (Electric Serial
Number).
[P0](BACK)
LPush
• Unit ID "UNIT ID"
Displays the transceiver's unit ID.
[P0](BACK)
LPush
5-13
one or more times to set
[P1](OK) to save.
to cancel, and return to the
to return to the previous screen.
or [ΩP3] or [P4≈]
or [P1] to return to the previous
or [P1] to return to the previous screen.
or [P1] to return to the previous screen.
or [P1] to return to the previous screen.
one