Icom iF4261DT Operating Manual page 44

Previous view
5
MENU SCREEN
Menu items
D Function menu (Continued)
Mobile Function
• RX Speaker "RX SPEAKER"
(For the Mobile type transceiver)
Select whether or not to turn the RX speaker function
ON or OFF.
When this function is ON, the received audio can be
heard through an external speaker that is connected
to the D-sub 25 pin connector.
1. Push [ΩP3] or [P4≈]
then push [P2] to save.
L Push [P1] to cancel, and return to the previous
screen.
2. Push [P1] to return to the previous screen.
NOTE:
• This function is usable when an external speaker is
connected to the D-sub 25 pin connector.
• This function is useful when the user is out of the
vehicle.
• The audio output level is linked to the transceiver's
volume control.
• Hook Scan "HOOK SCAN"
(For the Mobile type transceiver)
Select whether or not to turn the On Hook Scan
function ON or OFF.
When this function is ON, after putting the microphone
in its hanger (on-Hook), the transceiver automatically
starts scanning.
1. Push [ΩP3] or [P4≈]
then push [P2] to save.
L Push [P1] to cancel, and return to the previous
screen.
2. Push [P1] to return to the previous screen.
• Horn "HORN"
(For the Mobile type transceiver)
Select whether or not to turn the Horn function ON or
OFF.
When this function is ON, the HORN terminal of the
D-Sub 25 pin is activated after receiving a call with the
Dec EXO or RX EXO setting is ON.
1. Push [ΩP3] or [P4≈]
then push [P2] to save.
L Push [P1] to cancel, and return to the previous
screen.
2. Push [P1] to return to the previous screen.
NOTE:
• This function is usable when an external horn is
connected to the D-sub 25 pin connector.
• This function is useful when the user is out of the
vehicle.
• The audio output level is linked to the transceiver's
volume control.
to select ON or OFF, and
to select ON or OFF, and
to select ON or OFF, and
5-10