Configure Pppoe; Configure Multicast And Network Camera Occupation Detection - HIKVISION DS-7600NI-I2 Series User Manual

Network Video Recorder User Manual
Figure 4-2 DDNS
2. Turn on Enable.
3. Select a DDNS type.
4. Set parameters, including service address, domain name, etc.
5. Click Save.

4.1.3 Configure PPPoE

If the device is connected to Internet through PPPoE, you need to configure user name and
password accordingly. Contact your Internet service provider for details about PPPoE service.
Steps
1. Go to System → System Settings → Network → Network → PPPoE .
Figure 4-3 PPPoE
2. Turn on Enable.
3. Enter user name and password.
4. Click Save.
What to do next
Go to System → System Maintenance → Running Info → Network Status to view PPPoE status.

4.1.4 Configure Multicast and Network Camera Occupation Detection

Multicast can be configured to enable live view for cameras that exceed the maximum number
allowed through network. After enabling network camera occupation detection, when searching
network cameras, network cameras that have been added by another device will be marked.
8