Configure Pos Alarm - HIKVISION BCS-V-NVRXX02-4K Series User Manual

You can adjust the size and position of textbox on the preview screen of POS settings interface by
dragging the frame.
Step 7 Click Apply to activate the settings.

14.2 Configure POS Alarm

Purpose:
The POS event can trigger channels to start recording, or trigger full screen monitoring, audio
warning, notifying the surveillance center, sending email and so on.
Step 1 Go to Storage > Recording Schedule.
Step 2 Set the arming schedule of the POS event.
Step 3 Go to System > POS.
Step 4 On the POS adding or editing interface, set the arming schedule. Refer to Chapter 11.1
Configure Arming Schedule.
Step 5 Set the normal linkage actions: full screen monitoring, audio warning or send Email. Refer to
Chapter 11.2 Configure Alarm Linkage Actions.
Step 6 Select one or more alarm output (s) to trigger.
Step 7 Select one or more channels to record or become full-screen monitoring when POS alarm is
triggered.
Network Video Recorder User Manual
Figure 14-7 Overlay Character Settings
141