Parking Detection - HIKVISION DS-7608NI-M2 Series User Manual

detection alarm will be triggered.
7. Set the arming schedule. Refer to Configure Arming Schedule.
8. Set the linkage actions. Refer to Configure Linkage Actions.
9. Click Apply.

6.2.15 Parking Detection

Parking detection is used to detect parking violation in the area, applicable in expressway and one-
way street.
Steps
1. Go to Smart Analysis → Smart Event Settings → Other Events.
2. Select a camera.
3. Click Parking.
4. Check Enable Parking Detection.
5. Optional: Check Save VCA Picture to save the captured parking detection pictures.
6. Set parking detection parameters.
1) Select Arming Area.
Note
Up to 4 areas are selectable.
2) Set Time Threshold.
Network Video Recorder User Manual
Figure 6-12 Parking Detection
70