Region Exiting Detection - HIKVISION DS-7764NI-M4 User Manual

4. Check Enable Region Entrance Detection.
5. Optional: Check Save VCA Picture to save the captured pictures of region entrance detection
pictures.
6. Set detection rules and detection areas.
1) Select Arming Region.
Note
Up to 4 regions are selectable.
2) Set Sensitivity.
Sensitivity
The higher the value is, the easier the detection alarm will be triggered. Its range is [0-100].
3) Click Draw Region, and draw a quadrilateral in the preview window.
7. Optional: Draw the maximum size/minimum size for targets. Only the targets in the size ranging
from maximum size to minimum size will trigger line crossing detection.
1) Click Max. Size/Min. Size.
2) Draw an area in preview window.
3) Click Stop Drawing.
8. Optional: Select Detection Target as Human or Vehicle to discard alarms which are not triggered
by human body or vehicle.
9. Set the arming schedule. Refer to Configure Arming Schedule .
10. Set linkage actions. Refer to Configure Linkage Actions .
11. Click Apply.

6.2.8 Region Exiting Detection

Region exiting detection detects objects that exit from a predefined virtual region.
Network Video Recorder User Manual
Figure 6-7 Region Entrance Detection
58