Danger Zones With Unit In Vertical Position; Warning Signs - Siemens AXIOM Iconos R200 Operator's Manual

System Overview
Protective Measures
16
/ 44

Danger zones with unit in vertical position

The places marked in the illustration indicate possible danger points where the
patient or operating personnel can be injured.
If the patient is located in the danger zone, it must always be ensured that the
operating personnel are in the room and within reach of an emergency stop.
If the operating personnel leaves the room and/or moves out of reach of an
emergency stop, then the patient has to be moved out of the danger zone.

Warning signs

Special danger zones are marked on the unit with a warning sign.
This warning sign is a reference to a possible risk of injury by crushing for the pa-
tient and/or examiner.
This warning sign shows the position of the patient table in cardiopulmonary re-
animation (CPR) with pressure compression up to 500N (50kg).
1
Between -90° and +90°, depending on the system version
AXD3-340.620.13.01.02
Danger zone
1
Operator Manual