Siemens AXIOM Iconos R200 Operator's Manual page 202

Accessories
Optional Accessories
Attachment
30
/ 54
◆ Move the patient table to the horizontal position.
◆ Position the patient.
◆ Loosen the cap screw (1).
◆ Place the cassette holder on the accessory rail and move it to the exposure
position.
◆ Tighten the cap screw (1).
◆ Push and pull the cassette holder to ensure that it is seated properly.
1
◆ Lift the tensioning device (4).
◆ Place the cassette on the lower holder.
◆ Slide the tensioning device downward.
◆ Ensure that the cassette is seated properly in the holder.
◆ Loosen the cap screw (2) to permit adjustment of the height and the cap
screw (3) to permit lateral adjustment.
◆ With the patient positioned for the examination, adjust the height and lateral
tilt of the cassette.
◆ Tighten the cap screws (2) and (3).
◆ Ensure that the patient is stabilized and comfortable.
Have the patient place his/her hands on the grip protection strip, the grip strip,
or the handgrip, depending on the examination procedure. This will increase the
patient's feeling of security during the examination.
AXD3-340.620.13.01.02
3
2
4
Operator Manual