3
General information
32
Head First position of the patient
3.3.1
1
Position the back-of-the-head support on the head-heel insert of
the patient table so that it is flush with the edge marking of the
head-heel insert.
2
Position the patient's head on the back-of-the-head support.
3
If needed, insert the lookout mirror holder into the T-shaped
groove on both sides of the patient table.
Feet First position of the patient
3.3.2
The head of the patient is positioned on the back-of-the-head support
located at the foot end of the patient table. The feet of the patient are
positioned on the back side of the head-heel insert.
◆
Position the patient's feet in the corresponding recesses for the
heels on the head-heel insert.
3.4
Quality Assurance
A degraded MR image quality may indicate a malfunctioning RF coil.
A quality measurement is performed for each RF coil to verify
satisfactory operation.
Coils | Operator Manual
Print No. M4-08006G.623.01.02.02