Dismantling
Transport position
The C-arm system should be transported and
parked in a zero position.
✧
Move the C-arm into an orbital a.p. posi-
tion (1).
✧
Lower the lifting column fully (2).
✧
Move the horizontal carriage to the rear as
far as possible (3).
✧
Lock all brakes again.
Switching off
✧
Switch the unit off at the monitor trolley or
the C-arm system:
(4) Switching off at the monitor trolley
(5) Switching off at the C-arm system
➭
The imaging system is shut down and
switched off in the "hibernate" state.
Switching the system back on takes
approx. 45 secs. until it is fully opera-
tional.
➭
The 13th time the system is switched off,
it is automatically completely shut down.
Switching the system back on then takes
approx. 3 mins. until it is fully operational.
✧
Disconnect the monitor trolley from the
C-arm system.
✧
Roll up the cables at the rear of the moni-
tor trolley (6).
➭
The C-arm system is ready for transport.
101