Procedure - Compression mechanism
Remove the covers from compression unit
•
System OFF.
•
Pry open the lid on the maximum compression force presetting knob. Loosen the screw
underneath the lid and remove the knob (1/Fig. 1).
Fig. 1
•
Remove the cover from the manual compression/decompression knobs (2/Fig. 1).
•
Release the locking pin on the upper and lower cover and remove the covers.
•
Loosen the Allen screws on top and at the bottom of the compression unit holding the left
side cover (3/Fig. 1). Remove the side cover.
Siemens AG
Medical Solutions
Locking pin
3
3
SPB7-230.841.03
Rev. 02
04.04
2
1
2
Page 1 of 6
M300/1000/3000/3000 Nova
CS PS 24
2 - 1
2
Service