Foot Switch Assemblies For Fluoroscopy And Radiography - Siemens AXIOM Iconos R200 Operator's Manual

Application
Attachment
AXIOM Iconos R200
Foot switch assemblies for fluoroscopy and
radiography
For releasing radiographic or fluoroscopic exposures during tableside examina-
tions.
◆ Insert the foot switch plug into the receptacle in the electronics cabinet.
◆ Turn the locking ring of the plug to the right until the connector is seated prop-
erly.
◆ Route the cable along the floor appropriately.
◆ Position the patient.
Caution
Route the cable carefully to avoid safety hazards (e.g. tripping).
Do not permit the wheels of transport devices such as carts and wheelchairs to
run over the pedals of the foot switch assembly,
since this could cause inadvertent radiation release.
The following steps require radiation release.
Ensure proper radiation protection.
AXD3-340.620.13.01.02
Accessories
Optional Accessories
33
/ 54