Siemens AXIOM Iconos R200 Operator's Manual page 194

Accessories
Optional Accessories
Removal
22
/ 54
◆ Push the locking lever (1) on the rear of the footboard all the way to the stop
in the direction of the arrow.
◆ Make sure the footboard is attached firmly by pushing and pulling it.
◆ Move the tabletop to approximately the 80° position .
◆ Move the tabletop headwards.
◆ Push the locking lever (1) on the rear of the footboard in the direction of the
arrow and hold it.
◆ Remove the footboard extension.
◆ Release the locking lever.
AXD3-340.620.13.01.02
1
1
Operator Manual