Siemens AXIOM Iconos R200 Operator's Manual page 209

Removal
AXIOM Iconos R200
◆ Insert the radiation shield in the front accessory rail and slide it to the appro-
priate work position.
◆ Tighten both cap screws.
◆ Push and pull on the radiation shield to ensure that it is seated properly.
◆ Tilt the radiation shield into a protective position.
❏ The radiation shield can be tilted inward on the accessory rail as well as out-
ward and all the way down.
◆ Move the patient table to the horizontal position.
◆ Tilt the radiation shield to the vertical position.
◆ Loosen both cap screws.
◆ Remove the lateral radiation shield from the front accessory rail.
AXD3-340.620.13.01.02
Accessories
Optional Accessories
37
/ 54