Siemens AXIOM Iconos R200 Operator's Manual page 220

Accessories
Optional Accessories
Removal
Radiation protection
value:
48
/ 54
◆ Be sure to set the examination unit horizontal (± 10°)!
◆ As required hook a lead-rubber apron on the front bar of the holder.
◆ Hook the second lead-rubber apron according to the position of the examiner
on the left or right bar.
Do not exceed the maximum permissible additional weight of 70N or 7kg. This
means that at the most 2 lead-rubber aprons may be hooked onto the bar.
◆ Unhook the lead-rubber aprons from the bars after one another and carefully
place them on the side (do not kink them).
◆ Pull the bars out from the accessory rails of the collimator.
◆ Store the accessory in a suitable place.
The lead-rubber elements of this accessory are inserted in welded plastic pock-
ets. These pockets are riveted with the rails.
The plastic pockets can be cleaned easily with mild dish-washing liquid solu-
tions.
The lead equivalent of the double-layer lead-rubber apron is 0.5 mm Pb at 80 kV.
AXD3-340.620.13.01.02 Operator Manual