Epson 802.11g Reference Manual page 163

Set Using Automatic
Private IP Addressing
(APIPA)
Set Using PING
DNS Server Address Settings
Items
Acquire DNS Server
Address Automatically
DNS Server Address
Host Name and Domain Name Settings
Items
Acquire Host Name and
Domain Name
Automatically
Host Name
Domain Name
Select Enable to get a private address
between 169.254.1.1 and 169.254.254.254
automatically when an IP address cannot be
obtained by the DHCP server; otherwise,
select Disable.
Enables or disables IP address setting using the
ping command.
Explanations
Select either Enable or Disable to acquire the
DNS server address from the DHCP server.
Enter the DNS server address. When the DHCP
server does not respond even Enable is
selected for Acquire DNS server address
automatically, the DNS server address set
here is used.
Explanations
Select either Enable or Disable to acquire the
host name and domain name from the DHCP
server.
Enter the host name supported by Dynamic
DNS (between 2 and 63 characters). The total
number of characters of the host name and
the domain name must not exceed 251.
Leave it blank or enter two or more characters
of the domain name. The total number of
characters of the host name and the domain
name must not exceed 251.
163