Epson 802.11g Reference Manual page 143

4. Select Install Network Utility.
5. Click the Install button located next to EpsonNet Config.
6. Follow the on-screen instructions to complete the installation.
Note for Windows XP Service Pack 2 users:
If the following screen appears after you start EpsonNet Config, click
the Unblock button; otherwise the devices are not listed on the
screen of EpsonNet Config.
Accessing the EpsonNet Config Reference
Guide
The EpsonNet Config Reference Guide contains detailed information
on EpsonNet Config. Follow the steps below to access the
EpsonNet Config Reference Guide.
143