Using Bindery Print Server (Netware 3.X/4.X); Using Nds Print Server (Netware 4.X/5.X/6.0) - Epson 802.11g Reference Manual

Using Bindery Print Server (NetWare 3.x/4.x)

This section contains instructions on using the network interface
in the Print Server mode on NetWare 3.x/4.x/IntranetWare with
Bindery emulation.
Note:
The network interface in the Print Server mode of NetWare 3.x does not
allow you to use the Print Server status display control with
PCONSOLE.
1. Turn on the device.
2. From any NetWare client, log in to the target NetWare server
with supervisor privileges. You must log in with the bindery
connection.
3. Configure the network interface using EpsonNet Config. See
the EpsonNet Config Reference Guide for details.
If NetWare objects are already created, you can also use
EpsonNet Config with Web Browser. See "NetWare" for
details.

Using NDS Print Server (NetWare 4.x/5.x/6.0)

This section contains instructions for using the network interface
in the Print Server mode on NetWare 4.x, IntranetWare, NetWare
5.x, or NetWare 6.0 with NDS mode.
1. Turn on the device.
2. From any NetWare client, log in to the target context of the
NDS tree as an ADMIN.
221