Table of Contents
Advertisement
Problem Solver
General Problems
Cannot configure the network interface or cannot print from the
network.
Cause
The printer settings or
network settings may be
wrong.
Cannot print even if you have assigned the IP address to the
computer and the network interface.
Cause
You have assigned an IP
address to the computer
manually, but you assigned
the IP address to the network
interface by Automatic
Private IP Addressing
(APIPA).
Unable to start EpsonNet Config.
Cause
What to do
First, check to see if you can print a status
sheet, as described in "Status sheet
button". If you can print a status sheet,
check the network settings; otherwise,
set the interface mode of the printer's
control panel to Auto or Option.
What to do
Assign the IP address for the network
interface so that it belongs to the same
segment of the computer. Use EpsonNet
Config or the printer's control panel.
What to do
265
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 802.11g and is the answer not in the manual?
Questions and answers
my rx620 epson printer will not print any thing on the paper but the fist 3 cartridges are down to half full and the other 3 are close and i dont know where all the ink is going . the printer as working fine then just stopped printing goes through all the motions like it is