Table of Contents
Advertisement
Cause
Clients may not be registered,
or the network interface may
not be logged in to the
NetWare server.
EpsonNet Config will not start correctly.
Cause
Microsoft NetWare Directory
Service is installed on your
computer.
It takes a long time to start EpsonNet Config.
Cause
The Novell Client service is
installed.
The devices on the IPX network do not appear in the EpsonNet
Config dialog box.
Cause
The device is turned off.
The device is not in the same
segment as the computer
where you installed
EpsonNet Config.
274
What to do
Make sure clients are registered as users
of the print queue and the print server.
Also, make sure the network interface is
logged in to the NetWare server.
What to do
If you are using the NDS service, install
the Novell NetWare Client service.
What to do
Double-click Network in Control Panel,
and then double-click the network
adapter that does not use the
IPX/SPX-compatible protocol. Clear the
items related to IPX to unbind IPX.
What to do
Turn on the device.
To search for network interfaces in other
segments, use Search options of
EpsonNet Config.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 802.11g and is the answer not in the manual?
Questions and answers
my rx620 epson printer will not print any thing on the paper but the fist 3 cartridges are down to half full and the other 3 are close and i dont know where all the ink is going . the printer as working fine then just stopped printing goes through all the motions like it is