Configuring The Printer Port - Epson 802.11g Reference Manual

The port
Information
Finish button
Back button
Cancel button
The printer is now ready for peer-to-peer printing. To configure
the printer port, go to "Configuring the Printer Port".

Configuring the Printer Port

Follow the steps below to configure the printer port. The printing
speed differs depending on your selection.
1. For Windows Me/98/95/2000/NT 4.0: Click Start, point to
Settings, and then select Printers.
For Windows XP/Server 2003: Click Start and then Printers
and Faxes.
2. Right-click the target printer, and then click Properties.
3. For Windows Me/98/95: Click the Details tab, and then click
the Port Settings button.
For Windows XP/Server 2003/2000/NT 4.0: Click the Ports
tab, and then click the Configure Port button.
188
The following items are displayed:
- Port Name
- Host Name or IP Address
- Protocol
Register the port information to the system and
close the Add EpsonNet Print Port Wizard.
Go back to the printer list window.
Close the Add EpsonNet Print Port Wizard.