Download Print this page
Epson 802.11g Setup Manual
Epson 802.11g Setup Manual

Epson 802.11g Setup Manual

802.11g wireless ext. print server
Hide thumbs Also See for 802.11g:

Advertisement

Quick Links

EpsonNet 802.11g Wireless Ext. Print Server
Setup

Package Contents

Your network interface package includes the following items:
Wireless network interface
AC adapter (A261H) and power cord
USB cable
Software CD-ROM
You need to prepare the following items:
Epson device (such as printer or all-in-one) with USB port. (See the
Reference Guide for information on the supported devices.)
Access point (required for Infrastructure mode only)
Computer with USB port
Note:
To get to the access point via a wireless network, you need to install an 802.11b/g WLAN compliant network interface card on your
computer.
The term "network interface" refers to the EpsonNet 802.11g Wireless Ext. Print Server in this guide.
The network interface supports the following operating systems: Windows XP/Me/98 SE/2003/2000 and Mac OS X 10.2 or later/9.1 or later.
See the manual shipped with your printer or all-in-one for the supported operating system of your printer or all-in-one.
For Windows
If you are going to use the network interface with all-in-one, see
the back side of this sheet.
Otherwise, follow the steps below to install the Reference Guide
on your computer to see the setup instructions.
1. Insert the Software CD-ROM in the CD-ROM drive.
2. From the Welcome screen, click Next.
3. Read the license agreement, and then click Agree.
4. Select Install Network Utility.
5. Click the Install button located next to Reference Guide.
6. To view the Reference Guide, double-click the
Reference Guide icon on the desktop. See "How To" in the
Reference Guide for detailed information.
You can also access the Reference Guide via the Start
menu. To do so, click Start, point to All Programs (Windows
XP/Server 2003) or Programs (Windows Me/98/2000), and
then select EPSON. Click EpsonNet Reference Guide.
English
4052667-00
xxx
For Macintosh
Follow the steps below to install the Reference Guide on your
computer to see the setup instructions.
1. Insert the Software CD-ROM in the CD-ROM drive.
2. Double-click the EPSON CD-ROM icon.
3. Double-click the appropriate OS icon in the EPSON folder.
4. From the Welcome screen, click Next.
5. Read the license agreement, and then click Agree.
6. Select Install Network Utility.
7. Click the Install button located next to Reference Guide.
EpsonNet
8. To view the Reference Guide, double-click the
Reference Guide icon on the desktop.
See "How To" in the Reference Guide for detailed
information.
Notes contain important information and
useful tips on the operation of your product.
Continue to the next page...
Notes
EpsonNet

Advertisement

loading

Summary of Contents for Epson 802.11g

  • Page 1: Package Contents

    To get to the access point via a wireless network, you need to install an 802.11b/g WLAN compliant network interface card on your computer. The term “network interface” refers to the EpsonNet 802.11g Wireless Ext. Print Server in this guide. The network interface supports the following operating systems: Windows XP/Me/98 SE/2003/2000 and Mac OS X 10.2 or later/9.1 or later.
  • Page 2 For EPSON STYLUS PHOTO RX500/600 and EPSON STYLUS CX4600/ 6400/6600 Users (Windows Users Only) Follow the steps below to set up the all-in-one for use on a wireless network. Make sure the all-in-one is set up and the software for the all-in- one is installed on your computer before taking the steps below.