Table of Contents
Advertisement
You have selected a phone
line or modem (for Internet
Explorer 4.0x) for the Internet
connection.
A communication error message appears when you start
printing or when you open the printer's properties.
Cause
When you print with
NetBEUI or IPP, EPSON
Status Monitor cannot be
used.
Windows XP/2000/NT environment
You cannot access the Network Storage from Windows XP/2000.
Cause
You may have a print error in
the LPR or NetBEUI
environment.
A dial-up connection dialog box appears when you are printing
with TCP/IP via EpsonNet Print.
Cause
Printing ends normally after you cancel
this dialog box, but the message appears
every time you print. Connect to the
Internet using a local area network or
start a dial-up network manually.
What to do
Open the printer's properties and then
click the Optional Settings tab. Select
the Update the Printer Option
Information manually radio button.
Open the printer's properties and then
click the Utility tab. Clear the Monitor the
Printing Status check box.
What to do
Clear the print error and then access the
Network Storage. See the printer's
manual to clear the error.
What to do
271
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 802.11g and is the answer not in the manual?
Questions and answers
my rx620 epson printer will not print any thing on the paper but the fist 3 cartridges are down to half full and the other 3 are close and i dont know where all the ink is going . the printer as working fine then just stopped printing goes through all the motions like it is