Note:
The EpsonNet Config utility configures the network interface to work
only with protocols that exist on your network. This does not imply that
you can use all of the above-mentioned protocols on your network or
operating system. The protocols that the network interface can use may
vary depending on the operating system and the network configuration.
About This Guide
This Reference Guide contains information about using the
network interface on a network. It includes how to set up the
network interface, install the configuration software, and modify
network settings of your device and computer.
For information about your device, see the manual shipped with
the device.
Note:
To read the online guide, you must have Microsoft Internet Explorer
4.0 (or later) or Netscape Navigator 4.0 (or later) installed on your
computer.
This guide is written for network administrators, and many of the
steps included here require detailed network knowledge and
administrator rights.
The term "network administrator" refers to the person responsible
for maintaining the network. "Administrator" is synonymous with
"Supervisor" in this guide.
The term "network interface" refers to the EpsonNet 802.11g
Wireless Ext. Print Server in this guide.
The term "device" refers to the printer or all-in-one that is supported
by the network interface.
2
Need help?
Do you have a question about the 802.11g and is the answer not in the manual?
Questions and answers
my rx620 epson printer will not print any thing on the paper but the fist 3 cartridges are down to half full and the other 3 are close and i dont know where all the ink is going . the printer as working fine then just stopped printing goes through all the motions like it is