The following table lists the components required for
configuring the network interface with EpsonNet Config.
EpsonNet Config's setting screens
TCP/IP, AppleTalk, IPP, SNMP (IP trap)
MS Network
NetWare, SNMP (IPX trap)
The following table lists the components required for network
printing.
Printing method
LPR or Internet printing
Microsoft Network Shared
printing
Printing via NetWare server
5. If the necessary components are not in the list, click Install to
install them, as described below.
For LPR or Internet printing:
Internet Protocol (TCP/IP) is installed by default. You cannot
add or delete it.
For Microsoft Network Shared printing:
Select Client and then click Add. Select Client for Microsoft
Networks and then click OK.
For printing via NetWare server:
Download the latest Novell Client from the Novell Web site
and install it on the computer. Also, be sure to install IPX. See
the Novell Web site for detailed information.
Necessary components
Internet Protocol (TCP/IP)
Internet Protocol (TCP/IP)
Latest Novell Client
downloaded from the Novell
Web site
Necessary components
Internet Protocol (TCP/IP)
Internet Protocol (TCP/IP)
Client for Microsoft Networks
Latest Novell Client downloaded
from the Novell Web site
29
Need help?
Do you have a question about the 802.11g and is the answer not in the manual?
Questions and answers
my rx620 epson printer will not print any thing on the paper but the fist 3 cartridges are down to half full and the other 3 are close and i dont know where all the ink is going . the printer as working fine then just stopped printing goes through all the motions like it is