Table of Contents
Advertisement
2. Double-click the CD-ROM drive.
3. In the ENGLISH folder, open the APPS folder, and then open
the AddNet folder.
4. Double-click SETUP.EXE. Follow the on-screen instructions.
Note for EPSON STYLUS PHOTO RX500/600 and EPSON STYLUS
CX4600/6400/6600 users
5. In the ENGLISH folder, open the APPS folder, open the
UPDATER folder, and then open the WINXP_2K folder.
6. Double-click UPDATE.EXE. Follow the on-screen instructions.
Using the NET USE command
If you are running Windows XP/Server 2003/2000/NT and using
NetBIOS to connect to the device, we recommend that you use the
NET USE command, as follows:
1. Right-click the My Network Places icon and then select
Properties.
2. Right-click the Local Area Connections icon and then select
Properties.
3. Check that Client for Microsoft Networks is in the
Components list. If it is not installed, click Install to install it.
4. Run the command prompt and enter the following command.
NET USE printer port: \\NetBIOS name of network
interface\Device name of network interface
Selecting the port
1. Click Start, point to Settings, and then select Printers.
131
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 802.11g and is the answer not in the manual?
Questions and answers
my rx620 epson printer will not print any thing on the paper but the fist 3 cartridges are down to half full and the other 3 are close and i dont know where all the ink is going . the printer as working fine then just stopped printing goes through all the motions like it is