Table of Contents
Advertisement
NDS Context
Primary File Server
Name
Remote Printer Mode
Items
Primary Print Server
Name
Printer Port Number
TCP/IP
IP Address Settings
Items
Method for Acquiring the
IP Address
IP Address
Subnet Mask
Default Gateway
162
Enter the NDS context (up to 255 characters) if
the mode is NDS Print Server.
If the mode is Bindery Print Server, enter the file
server name (up to 47 characters) where you
log in to the print server.
Explanations
Enter the primary print server name (up to 47
characters).
Enter the printer port number (0 to 254).
Explanations
Select a method for acquiring IP addresses. If
Auto is selected, DHCP becomes available.
To use the DHCP server, make sure it is installed
on your computer and correctly configured.
See your operating system's online help for
detailed instructions.
To set the IP address manually, select Manual.
Enter an IP address for the network interface.
Be sure the IP address does not conflict with
any other devices on the network.
Set the subnet mask.
Set the gateway address if needed.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 802.11g and is the answer not in the manual?
Questions and answers
my rx620 epson printer will not print any thing on the paper but the fist 3 cartridges are down to half full and the other 3 are close and i dont know where all the ink is going . the printer as working fine then just stopped printing goes through all the motions like it is