Table of Contents
Advertisement
In NetWare Administrator, double-click the NDPS Manager
object and click the Printer Agent List button. Check that the
status of the Printer Agent you have just created is "Idle".
Note:
If you have selected Remote (rprinter on IPX), configure the network
interface using EpsonNet Config, as described in the next section,
and then print a status sheet.
Go to the next section if you select Remote (rpinter on IPX).
Go to "Setting the printer on client workstations" if you select
Remote (LPR on IP) or Forward jobs to Queue.
Configuring for NetWare using EpsonNet Config
Follow the steps below if you want to use the printer in IPX
network.
Note:
Be sure that the one of the following clients is installed on your computer:
Novell Client 32, Novell IntranetWare Client, or Novell Client.
1. Turn on the device.
2. From any NetWare client, log in to the target NetWare server
as an ADMIN.
3. Run EpsonNet Config from the Start menu. See "Accessing
the EpsonNet Config Reference Guide" for details.
If the IP address of the printer is already assigned, you can
use EpsonNet Config with Web Browser too. See "NetWare"
for details.
240
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 802.11g and is the answer not in the manual?
Questions and answers
my rx620 epson printer will not print any thing on the paper but the fist 3 cartridges are down to half full and the other 3 are close and i dont know where all the ink is going . the printer as working fine then just stopped printing goes through all the motions like it is