Table of Contents
Advertisement
Note:
The Windows 2000 CD-ROM may be required during the
installation.
When using TCP/IP or IPP for printing, you need to set the IP
address, the subnet mask, and the default gateway of the computer.
1. Click Start, point to Settings, and then select Network and
Dial-up Connections. The Network and Dial-up
Connections screen appears.
2. Right-click the desired network connection and then select
Properties.
3. Check if the following necessary components are in the list. If
they are already installed, see "How to Set Up the Network
Interface".
36
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 802.11g and is the answer not in the manual?
Questions and answers
my rx620 epson printer will not print any thing on the paper but the fist 3 cartridges are down to half full and the other 3 are close and i dont know where all the ink is going . the printer as working fine then just stopped printing goes through all the motions like it is
The Epson RX620 printer may not be printing despite having ink in the cartridges due to one of the following reasons:
1. The ink cartridge is not fitted properly.
2. The ink cartridge hooks may be broken.
3. The CSIC board may have come off.
These issues can cause the printer to detect an ink cartridge error even if ink is present.
This answer is automatically generated