Use AppleTalk
Printer Name
Zone Name
Entity Type
Network Number Set
Network Number for
Manual Mode
MS Network
Items
Use Microsoft Network
Shared Printing
Print Server Name
Workgroup Name
Printer Share Name
File Share Name
Enable or Disable AppleTalk.
Enter the name of the device attached to
the network interface (up to 32 characters).
Enter the network zone name (up to 32
characters). To have the zone selected
automatically, select Auto for the Network
Number Set and enter an asterisk (*) in this
text box.
Displays the entity type of the device. Do not
change the entity type unless "epson"
appears. If "epson" appears, enter an entity
type to match your device.
Select Auto or Manual. Usually Auto is
recommended.
Enter the network number when you select
to set the Network Number manually.
Explanations
Enable or Disable Microsoft network.
Enter the print server name, which is the
name of a computer on the network (up to
15 characters). Be sure to give a name that
is unique on the network.
Enter the workgroup name or domain name
(up to 15 characters).
Enter the device's share name (up to 12
characters). LPT1, LPT2, or LPT3, or COM
cannot be used.
Enter the file share name (up to 12
characters). LPT1, LPT2, or LPT3, or COM
cannot be used.
165
Need help?
Do you have a question about the 802.11g and is the answer not in the manual?
Questions and answers
my rx620 epson printer will not print any thing on the paper but the fist 3 cartridges are down to half full and the other 3 are close and i dont know where all the ink is going . the printer as working fine then just stopped printing goes through all the motions like it is
The Epson RX620 printer may not be printing despite having ink in the cartridges due to one of the following reasons:
1. The ink cartridge is not fitted properly.
2. The ink cartridge hooks may be broken.
3. The CSIC board may have come off.
These issues can cause the printer to detect an ink cartridge error even if ink is present.
This answer is automatically generated