Epson 802.11g Reference Manual page 269

There are several possible
causes. Check the items
described on the right.
The wireless communication speed is very slow.
Cause
There are several possible
causes. Check the items
described on the right.
Unable to start EPSON Scan.
Cause
Make sure the network interface is
properly connected to the device using
the USB cable.
Make sure the device and the network
interface are turned on.
Make sure the mode, WEP Key, SSID,
authentication method, and channel (for
Ad Hoc mode) of the network interface
and the wireless LAN are the same.
Make sure there is no radio interference
causing the problem.
Check the connection range of the
network interface.
What to do
Adjust the location and orientation of the
access point.
If interference occurs, switch to another
channel.
Other devices may be causing the
interference. Relocate the "noisy"
devices if found.
What to do
269