Table of Contents
Advertisement
Using Bindery Remote Printer Mode (NetWare 4.x)
Using NDS Remote Printer Mode (NetWare 4.x/5.x/6.0)
Using the NDPS Gateway
Outline of settings
Making printer environment
Creating an NDPS Manager
Creating a Printer Agent
Configuring for NetWare using EpsonNet Config
Setting the printer on client workstations
Instructions for Using a Dial-Up Network
Using a dial-up network in each mode
When there is a primary server at the dial-up destination
When there is a primary server in the local network
Settings for UNIX Users
Introduction to UNIX Settings
lpr filters
Setting Up Different UNIX Systems Using the lpr Command
Setting up for SunSoft Solaris 2.4 or later
Setting up for SunOS 4.1.4 or later
Setting up for IBM AIX 3.2.5 or later and 4.1.3 or later
Setting up for HP-UX 9.05 or later
Setting up for SCO UNIX 4.2 or later (Open Server)
Using the ftp Command
Tips
Instructions on Using DHCP
Setting an IP Address Using the arp/ping Command
Checking the LAN
Setting and checking the new IP address
Instructions on Using a Dial-Up Router
Function of Universal Plug and Play
Uninstalling Software
Windows XP/Server 2003
Windows Me/98/95/2000/NT 4.0
Macintosh
296
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 802.11g and is the answer not in the manual?
Questions and answers
my rx620 epson printer will not print any thing on the paper but the fist 3 cartridges are down to half full and the other 3 are close and i dont know where all the ink is going . the printer as working fine then just stopped printing goes through all the motions like it is