Epson 802.11g Reference Manual page 52

Note for Windows users
If you are using an ink jet printer or all-in-one (excluding EPSON
STYLUS PHOTO RX500/600/1280/2200), follow the steps below
after installing the printer driver. You can use EPSON Status
Monitor 3 via the wireless network.
1. Insert the Software CD-ROM in the CD-ROM drive.
If the Installer dialog box appears automatically, click the Exit
button.
2. Double-click the CD-ROM drive.
3. In the ENGLISH folder, open the APPS folder, and then open
the AddNet folder.
4. Double-click SETUP.EXE. Follow the on-screen instructions.
Using the network storage
If the device connected to the wireless network interface has
memory card slots, you can display or read data on the memory
card via a wireless network.
52