Table of Contents
Advertisement
6. Select a method for specifying the IP address. If you select
Automatic, DHCP becomes available and assigns an IP
address automatically. If you want to set the IP address
manually, select Manual and enter the IP address, subnet
mask, and default gateway.
7. Click the Send button to send the settings to the network
interface.
8. Pull out the USB cable from your computer and the network
interface.
9. Install the printer driver.
See the section appropriate for your operating system.
"For Windows XP/Server 2003/2000/NT 4.0 Users"
"For Windows Me/98/95 Users"
For more detailed information on EpsonNet Config, see the
EpsonNet Config Reference Guide.
51
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 802.11g and is the answer not in the manual?
Questions and answers
my rx620 epson printer will not print any thing on the paper but the fist 3 cartridges are down to half full and the other 3 are close and i dont know where all the ink is going . the printer as working fine then just stopped printing goes through all the motions like it is