Windows Nt - Epson 802.11g Reference Manual

Windows NT 4.0

1. Be sure that TCP/IP is correctly installed and setup in the
computer and a valid IP address is set for the computer and
device.
2. Make sure that the IPP settings in EpsonNet Config are
correct. See the EpsonNet Config Reference Guide or "IPP" for
instructions on settings for IPP.
3. Click Start, point to Settings, and then select Printers.
4. Double-click the Add Printer icon and click Next.
5. Click the My Computer radio button and click Next.
6. Click the Add Port button, and select EPSON IPP Port from
the list. Then click the New Port button.
198