Setting The Paper Width And Checking The Port Setting; Procedure - Epson C323011 - TM J2000 B/W Inkjet Printer Installation Manual

Setting the Paper Width and Checking the Port Setting

When printing receipts, the paper width must be configured.
If you have not configured the port settings at installation or you want to change the settings,
configure the printer driver port settings before the test print.
If no settings are necessary, proceed to "Test Printing" in the next section.

Procedure

The configuration procedure is as follows.
1. Open the Printers and Faxes screen.
2. Right click the printer driver you have installed and select [Properties].
3. The Properties screen of the printer appears. To configure the paper width, select the
[Printer Settings] tab.
Select the paper width in accordance with the printer and click the [Apply] button.
2-14 APD Installation and Setup Rev.B