2Motion Setting - Epson TX800-12H User Manual

WellPreint System User Manual

4.4.2Motion setting

X-Moto Configuration: The print speed of the print control interface is set here. Slow and normal speed
can be set by you according to the actual situation. Fast speed has certain speed setting, which cannot
exceed the flash frequency of the head. At present, the 5
360resolution
Reposition speed: When click the Home in the software title menu bar, the cartridge motion speed
Return speed：When one-way printing, the speed of the cartridge return motion
Move、Reposition：It is used in calibrating the X gear ratio, and it has introduced in the debug steps
Y-Moto Configuration:
The speed of the feeding motor, divided into slow, normal and fast speed. The corresponding value of
feeding speed in other settings on the parameters interface is set here. The faster the feeding speed is, the
smoother the printing process will be. However, under the premise of no motor and no step loss, the
specific speed needs to be determined by actual debugging
and 7
th th
第 29 页 /共 34 页
Here, use it when
it has two heads,
and
attention
when it has one
head when select
print
PrintHead1
generation can support 1200mm/s with
WellPrint
only pay
to it
head as