Configuring Console And Modem Ports - Cabletron Systems EMME User Manual

5.8.8 Configuring Console and Modem Ports
The EMME Console and Modem ports support the following
applications:
Refer to the Release Notes included with the EMME to
NOTE
verify which Console and Modem Port applications are
currently supported.
• Local Management connections
• American Power Conversion (APC) Uninterruptible Power Supply
(UPS) connections
• Telnet connections to a wide area network via the Serial Line Internet
Protocol (SLIP)
• Unassigned applications for security reasons.
To configure the Console and Modem ports, perform the following steps:
1. Use the arrow keys to highlight the Console Application or the Modem
Application field.
Use caution not to alter the settings of the port which is
operating the current Local Management connection. This
WARNING
could disconnect the Local Management terminal from the
port and end the Local Management session.
EMME USER'S GUIDE
THE SYSTEM LEVEL SCREEN
Page 5-19