Setting The Emme Mode Switches - Cabletron Systems EMME User Manual

CHAPTER 3: INSTALLING THE EMME
3.2

SETTING THE EMME MODE SWITCHES

The bank of dip switches located at the top right of the EMME (shown in
Figure 3-1) should be set to their default positions when the module is
shipped. Check these switches to ensure that they are in the correct
position for normal operation of the EMME.
Page 3-2
On
Off
Figure 3-1. EMME Dip Switches
ON
1 2 3 4 5 6 7 8
051440
EMME USER'S GUIDE
EMME
Switches