This section describes the environmental specifications and safety and
approval requirements for the SWPIM-T1. Cabletron Systems reserves
the right to change these specifications at any time without notice. Pinouts
and the T1 cable are also listed in this appendix.
A.1
PHYSICAL PROPERTIES
Dimensions:
Weight (Unit):
Nominal current draw on +5V
supply from host platform:
MTBF (Predicted):
A.2
NETWORK INTERFACE
The connector for the RJ48 network port can be seen in
SWPIM-T1 Installation Guide
APPENDIX A
SPECIFICATIONS
1.91 H x 5.40 W x 19.05 D (cm)
0.75 H x 2.125 W x 7.50 D (in)
0.068 kg (0.15 lb)
150 mA
10,119,716 hours
1 2 3 4 5 6 7 8
Figure A-1 RJ48 Pinout
Figure
strj45
A-1:
A-1