Snmp Traps Screen; Trap Table Screen Fields - Cabletron Systems EMME User Manual

5.10 SNMP TRAPS SCREEN

Figure 5-7 shows the SNMP Traps screen. Configuring the SNMP Traps
screen allows the EMME to send SNMP Traps to multiple network
management stations. The following sections explain SNMP Trap screen
information fields as well as providing instructions for configuring them.
Event Message Line
EMME Local Management
Trap Destination
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
SAVE

5.10.1 Trap Table Screen Fields

SNMP Community Name - Displays the Community Name to be
included in the trap message sent to the Network Management Station
with the associated IP address.
Traps - Enables transmission of the traps to the network management
station with the associated IP address.
Trap IP Address - Indicates the IP address of the workstation to receive
trap alarms from the EMME.
EMME USER'S GUIDE
SNMP TRAPS
Trap Community Name
public
public
public
public
public
public
public
public
Figure 5-7. The SNMP Traps Screen
SNMP TRAPS SCREEN
Flash Image Version: XX.XX.XX
Enable Traps
(NO)
(NO)
(NO)
(NO)
(NO)
(NO)
(NO)
(NO)
RETURN
Page 5-23
051450